30Oct

Five machines in the same family share one working width (1630 mm) and one thickness ceiling (28 mm). Only four things differ: line speed (8, 18 or 28 m/min), heat ceiling (0–60 °C as standard, 0–120 °C as an option on three models), roller diameter (130 mm or 120 mm), and whether the machine carries rear trimmers. This is how to read those four differences against your own production sheet.

Learn More

26Oct

All three LeFu flatbed applicators share the same 1600 mm working width, the same 50 mm substrate capacity and the same 0–60 °C range. The only real variable is length — 3,000, 3,200 or 4,000 mm — plus 100 kg of machine weight and half a metre of floor space. This guide shows how to pick the right one from your own job history, and why the number most buyers compare is the wrong one.

Learn More

15Oct

Wrinkles in lamination rarely come from the film itself. Here are the six causes we see most, and the fix for each one.

Learn More

10Oct

A practical setup sequence for a new flatbed applicator — what to check on arrival, how to level and test it, and which jobs to run first.

Learn More

18Sep

Eight practical checks that separate a solid laminating machine from a cheap one — from frame stiffness and roller quality to service support and spare part availability.

Learn More

11Sep

A practical laminator maintenance checklist — daily, weekly and monthly — covering what to clean, what to check, and the habits that keep rollers and film quality steady for years.

Learn More