In the signage, graphics, and display industries, applying self-adhesive vinyl, protective films, or laminates onto large rigid or flexible substrates by hand is time-consuming and prone to bubbles and misalignment.
LeFu Customized Size Flatbed ApplicatorLeFu Customized Size Flatbed Applicator (B4 Series — e.g. LF1325-B4, LF1732-B4, LF1736-B4, LF1740-B4, LF1750-B4 and fully bespoke sizes) is a heavy-duty flatbed laminator / flatbed applicator designed for cold & warm (0–60°C) flat mounting of printed vinyl, reflective sheeting, protective film, and cold/hot laminates onto substrates such as: Rigid boards: KT board, Foam board, PVC board, Acrylic Sheet, Aluminum Composite Panel (ACP), Etc.
Flexible media: rolled prints, banners, posters, wall murals, vehicle wrap prints
Unlike roll laminators, the flatbed design allows oversized or rigid materials to lie flat while a pneumatically controlled silicone roller presses the film evenly from one end to the other — ensuring perfect adhesion without trapped air.
LF1740-B4 (1.6*4.0m/5*13ft) Customized Flatbed Applicator
Model: LF1740-B4 Customized Flatbed Applicator
Max Lamination Width: 1600mm/5.24ft
Max Lamination Length: 4000mm/13.12ft
Max Lamination Thickness: 50mm/1.96”
Lamination Temp: 0~60°C/0~140°F
Roller Up and Down: Pneumatic Pressure.
Fully Customizable Working Size
Beyond standard models (1.3×2.5 m / 1.6×3.0 m / 1.6×3.2 m / 1.6×4.0 m / 1.6×5.0 m), LeFu offers customized width & length (e.g. 2.2×4.0 m, 2.2×5.0 m, or any tailor-made dimension) and optional increased laminating thickness (up to ~200 mm on special builds), so the machine fits your shop floor and typical job size exactly.
Pneumatic Roller Lift & Adjustable Pressure
The top silicone roller (Ø 130 mm / 5″) is raised and lowered by an air compressor (6–8 bar recommended). Dual-side paddle switches let the operator control roller position from either side of the table. Pressure is adjustable to suit delicate fabrics vs. rigid boards — guaranteeing uniform pressure distribution and bubble-free results.
Warm & Cold Lamination Capability
LF1750-B4 (1.6*5.0m/5*16ft) Customized Flatbed Applicator
Model: LF1750-B4 Customized Flatbed Applicator
Max Lamination Width: 1600mm/5.24ft
Max Lamination Length: 5000mm/16.4ft
Max Lamination Thickness: 50mm/1.96”
Lamination Temp: 0~60°C/0~140°F
Roller Up and Down: Pneumatic Pressure.
Temperature-controlled heating system (0–60°C / 0–140°F) supports:
Signage & Graphics — Mount laminate/vinyl onto ACP, foam board, dibond for indoor/outdoor signs
Vehicle Wrap Prep — Apply pre-mask or cold laminate to large-format printed wraps
Reflective Sheeting — Bond reflective film to aluminum blanks for traffic/road signs
Architectural Décor — Apply anti-graffiti film, decorative veneer to wall panels & furniture components
Exhibition & POS — Laminate pop-up graphics, floor decals, retail display boards
Packaging / Industrial — Apply protective or functional films to insulation boards, composite panels
Cold lamination — ideal for heat-sensitive vinyl, PVC, window graphics
LF2240-B4 (2.2*4.0m/7*13ft) Customized Flatbed Applicator
Model: LF2240-B4 Customized Flatbed Applicator
Max Lamination Width: 2200mm/7.22ft
Max Lamination Length: 4000mm/13.12ft
Max Lamination Thickness: 50mm/1.96”
Lamination Temp: 0~60°C/0~140°F
Roller Up and Down: Pneumatic Pressure.
Warm lamination — activates hot-melt adhesives for stronger bonding on rigid panels, traffic signs, etc.Roller Up and Down: Pneumatic Pressure.Ergonomic Tilting Table & Safety Glass Bed
The tabletop is made of tempered safety glass on a reinforced aluminum alloy frame. Most models feature a foldable/tilting table for easier loading of large sheets and reduced footprint during storage/transport. LED back-lighting (on selected models/B4 series) assists with graphic alignment and quality checking.
Rear Media Roll Holder & User-Friendly Panel
An integrated rear media roll holder (standard 400 mm core, optional longer shafts) keeps film rolls aligned. The front LCD control panel provides intuitive adjustment of temperature, mode, and roller movement — minimal training required..
Double Gantry Flatbed Applicator
Model: Double Gantry Flatbed Applicator
Max Lamination Width: Customized Size
Max Lamination Length: Customized Size
Max Laminating Thickness: 50mm/1.96″
Lamination Temp: Warm 0~60C/0~140F.
Roller Up and Down: Pneumatic Pressure
Built for Durability & Certification
Heavy-gauge steel frame, industrial-grade pneumatic components, and CE / RCM / RoHS certified electrics ensure long service life in daily commercial use. LeFu provides 1–2 year warranty (per model) and spare-part kits (air compressor, cutting mat, media shaft, tools).
Typical Applications
Why Choose LeFu Flatbed Applicator?
LF1350-B2 Glass Flatbed Applicator
Model: LF1350-B2 Glass Flatbed Applicator
Max Lamination Width: 1300mm/51.18″
Lamination Speed: 7m/min
Max Laminating Thickness: 25mm/1″
Lamination Temp: Warm 0~100C/0~212F.
Roller Up and Down: Pneumatic Pressure
Glass Flatbed Applicator, Glass Flatbed Laminator
Since 2006, LeFu Digital has specialized in R&D and manufacturing of laminating & finishing equipment, exporting to 60+ countries. The Customized Size Flatbed Applicator reflects this experience — combining rigid-frame stability, operator-focused ergonomics, and true size-customization that off-the-shelf machines cannot offer. Whether you run a small sign shop needing a compact 1.3×2.5 m unit, or an industrial plant requiring a 2.2×5.0 m oversized flat mount table, LeFu engineers the solution around your workflow.
LeFu Laminator (https://www.lefudigital.com) is a leading manufacturer of Automatic Laminator, Roll Laminator, Hot Laminator, Warm Laminator, Cold Laminator, Wide Format Laminator, Flatbed Laminator, Flatbed Applicator in China from year of 2006.
