Model: LF1700-F1 Pro High Speed Automatic Laminator
Max Lamination Width: 1630mm/64”
Lamination Temp: 0~60°C/0~140°F
Max Lamination Speed: 50 M/Minute’
Swing In & Out Air Shaft: 2 Winder/ 1 Re-winder
Max Winder & Re-winder: Winder 350mm (13.7”)/Re-winder: 400mm (15.7”)
LF1700-F1 Pro High Speed Automatic Laminator is LeFu new model laminator, can meet the needs of a variety of laminating.
Intelligent Control System
There are two control systems before and after, which can control the machine switch in front, the rubber roller lifts, the forward -directional membrane, the reverse membrane, the coating speed of the membrane machine, and the membrane temperature, and you can also view the coverage of the film within nearly 30 days. After that, the rubber roller of the machine can be controlled, the membrane speed, etc., making the operator more convenient to operate.
Laser Positioning Device
The installation with a laser positioning device can ensure the location of the screen at any time during the membrane to ensure that the picture is not sloping.
Air Shaft Device
Equipped with three gas -rising shafts, which can tighten the rolls on the feed pole to prevent the material movement during the high -speed membrane.
High -Speed Lamination
The membrane speed is as high as 50 meters per minute, which can meet the demand for mass production of large factories.
High -Density Silicone Roller
The upper rubber roller is 180 mm and 150 mm of the lower rubber roller. Using double -gel roller film, high -density silicone roller can not only ensure the bubbles and folds that appear during the membrane, make the covered screen more exquisite. Life life.
If you want to know more details of the machine, please consult.
