A laser positioning device is an optional feature that Lefu 1700-F1 Laminators have. It helps with accurate alignment and positioning of the materials being laminated. Here’s how the laser positioning device typically works in a Lefu 1700-F1 Laminator:
LF1700-F1 Auto Laminator (50 m/min)
Model: LF1700-F1 Automatic Roll Laminator
Rear Trimmer: 3 Pcs
Max Lamination Width: 1630mm/64″
Lamination Temp: 0~60°C/0~140°F
Max Lamination Speed: 50 M/Minute
Roller Up and Down: Pneumatic PressureActivation: Most Lefu 1700-F1 Laminators with a laser positioning device will have a switch or button to activate it. When turned on, the laser beam will project onto the laminating surface.
Alignment: Place the materials you want to laminate, such as paper or photos, onto the laminating surface. Adjust the position of the materials until they align with the laser beam.
Fine-tuning: Use the laser beam as a guide to make any necessary adjustments, ensuring precise alignment and positioning of the materials. This is especially useful when working with multiple items or when accuracy is crucial.
Lamination: After achieving the desired alignment, proceed with the lamination process as you normally would, following the instructions provided by the Lefu 1700-F1 Laminator manufacturer.
It’s important to note that the laser positioning device is primarily a visual aid to assist with alignment. The actual lamination process is typically controlled separately by the Lefu 1700-F1 Laminator itself, following the standard procedures for temperature, speed, and pressure settings.
The availability and functionality of the laser positioning device can vary between different Lefu 1700-F1 Laminator models and brands. Therefore, it’s recommended to refer to the specific instructions provided by the manufacturer for the proper usage and adjustment of the laser positioning device on your Lefu 1700-F1 Laminator.
