There are several common problems that can occur with roll laminators:
Wrinkles or bubbles in the laminate: This may be caused by the rollers not being adjusted properly or the item being laminated not being aligned correctly. Make sure to adjust the rollers before use and carefully align the item being laminated.
Solution: Adjust the rollers before use and carefully align the item being laminated. Make sure to keep the laminate taut during the process.
Uneven lamination: Uneven lamination can be caused by uneven pressure on the rollers or an uneven thickness of the item being laminated. Make sure the rollers are adjusted properly and try to select items for laminating that have a consistent thickness.
Solution: Adjust the rollers to apply even pressure and select items for laminating that have a consistent thickness.
Misfeeds: If the roll laminator jams or misfeeds, it may be caused by a dirty roller or debris in the machine. Be sure to clean the rollers regularly and never force an item through the machine.
Solution: Clean the rollers regularly and never force an item through the machine. If it still jams, try using a different laminating film or contact the manufacturer for assistance.
Overheating: Roll laminators can overheat if used for extended periods of time. Allow the machine to cool down periodically between uses to prevent overheating.
Solution: Allow the machine to cool down periodically between uses to prevent overheating. You can also purchase a machine with built-in cooling fans.
Electrical Issues: Sometimes due to electrical issues, the laminator may stop working. In this case, check the power source and cord or contact a professional technician for assistance.
Solution: Check the power source and cord, and make sure the machine is properly grounded. If the issue persists, contact a professional technician for assistance.
If your LeFu laminators need any support, please feel free contact with us:
7*24Hrs Service Line: +86 136 5371 9152 (WhatsApp)
Technical Direct E-mail: alex@lefudigital.com
